Connect Perplexity to DIDWW#

Connect Perplexity to your DIDWW account to review account information and request supported DIDWW actions from a conversation. You authorize the connection in your browser using your existing DIDWW User Panel access.

Note

For current Perplexity instructions, see the official Perplexity guide for adding custom remote connectors .

Before you begin#

  • An active DIDWW account is required. Sign in to DIDWW or create a DIDWW account .

  • A Perplexity plan that supports custom connectors is required. Custom connectors are available on the Pro, Max, and Enterprise plans.

  • The DIDWW MCP server address is required. See DIDWW MCP connection details.

  • Access to your DIDWW two-factor authentication method is required when two-factor authentication is enabled.

Important

A custom connector can be added only in the Perplexity web application. Add and authorize DIDWW at perplexity.ai before you use it elsewhere.

Adding DIDWW to Perplexity takes three separate actions: create the custom connector, connect and authorize it, and then enable it in each conversation.

Step 1. Create the DIDWW custom connector#

  1. Sign in to Perplexity in a web browser.

  2. Open Settings.

  3. Select Connectors.

  4. Select + Custom connector, and then select Remote.

  5. Enter DIDWW as the connector name.

  6. Leave Description empty, or enter your own description.

  7. Enter the server address https://api.didww.com/mcp. See DIDWW MCP connection details.

  8. Leave Advanced unchanged. DIDWW uses OAuth over Streamable HTTP and does not require a client ID or client secret.

  9. Select I understand custom connectors can introduce risks.

  10. Select Add.

Perplexity creates the connector and opens its card. The card is empty at this point because DIDWW is not connected yet.

Important

Connect only to an MCP server address published by DIDWW. Do not use an address received in a Perplexity conversation or from an unverified source.

Step 2. Connect DIDWW#

  1. Open the DIDWW connector card in Connectors.

  2. Select + Add connector.

Perplexity opens the DIDWW authorization page in your browser.

Step 3. Authorize access to DIDWW#

  1. Sign in to the DIDWW User Panel if you are not already signed in.

  2. Complete two-factor authentication when required.

  3. Confirm that the application requesting access is Perplexity.

  4. Review the DIDWW account, user, and roles shown on the page.

  5. Read the information under Before you connect an AI assistant.

  6. Select I understand and accept.

  7. Select Authorize.

  8. Select Open Perplexity to return to Perplexity.

Note

Authorizing the connection does not grant Perplexity additional DIDWW permissions. Perplexity can access only the accounts, information, and actions available to the DIDWW user who authorized the connection.

Step 4. Review the connection#

  1. Open Settings.

  2. Select Connectors.

  3. Confirm that DIDWW is shown as Connected.

Step 5. Enable DIDWW in a conversation#

DIDWW is not used automatically after it is connected. Enable it in each conversation where you want to use it.

  1. Open a new Perplexity conversation.

  2. Select + next to the message field.

  3. Select Connectors.

  4. Select DIDWW.

Step 6. Verify the connection#

  1. Ask Perplexity the following read-only question:

    Which DIDWW account is currently active?
Do not make any changes.

  2. Review any connector-use request displayed by Perplexity.

  3. Confirm that Perplexity returns the expected DIDWW account.

Note

Perplexity’s connector approval and DIDWW’s action confirmation are separate controls. DIDWW may require another confirmation for a purchase, usage rate, deletion, termination, or another protected account change.

To view connections and revoke Perplexity’s authorization from the DIDWW side, see Manage the connection.